Acoustic foam panels

How to Hang an acoustic foam panels?

What are Acoustic foam panels?

An acoustic foam panel is used to reduce noise, echo, and unwanted reverberations. This panel is generally used in restaurants, auditoriums, and recording studios. It is also hung in large rooms with large reverberative surfaces such as theaters, concert halls, churches. 

Acoustic foam panel is a different type of sound absorption from soundproofing. This panel is made with polyurethane or extruded melamine foam. If you want to create a studio and have the space for it in your own house, you can make it.

Acoustic foam panel installation process

After cleaning the space or the room, the primary and speedy thing you have to do is acoustic treatment. There are many kinds of sound-absorbing and soundproofing materials; among them, acoustic foam panel is budget-friendly and valuable material. 

Acoustic foam panels should be adequately hung to work honestly. The acoustic foam panel has two sides; one of them is either cone or wedge or pyramid or uneven cuboid shapes. This panel can be attached to the optimal area of the walls, doors, ceilings, or record room to protect reverberation. If it is improperly hung on a wall, ceiling, or door, the sound reverberation in the space won’t be prevented entirely.

There are many ways to install acoustic foam panels to get a better effect. The best process to hang it will be based on your purposes concerning sound quality, the kind of surface it will cover, and other factors. To turn the acoustic foam panels on drywall or some other smooth surface, you can use strong double-sided tape and push pins in the place. 

Spray adhesive is a generally known process of hanging acoustic foam panels though it is agreeable, thrifty, and fast. Installing acoustic foam panels is the cheapest and quick process.  

Adhesive spray    

Spray adhesive is the best way to paste acoustic foam panels on smooth surfaces. Wallpapers won’t be able to hold the foam panels. Many people use adhesive spray onto cardboard or thin wood to ascend the board and not apply adhesive spray on the wall or ceiling directly. 

Applying directly will ruin the wall or ceilings. First, spot the parts of the walls, ceilings, or the surface you want to cover with masking tape or a pencil. The surface should be cleaned with isopropyl alcohol. If you skip this process, the adhesive spray may not hold securely. After that, wipe the washed surface dry with a paper towel or dry cloth. 70°C is the adequate temperature for the adhesive.

The room temperature should be around 70°C before applying the adhesive spray. Stand by at least 10 seconds for the bond to adjust. Set the acoustic foam and firmly press it for 30 seconds.

Apply all the acoustic foam panels all over the room or the preferred surfaces. Maintain the room temperature at 70 °C for two days for the best results. 3M Hi- strength 90,3M super 77 Auralex acoustics foamtak are the best adhesive spray for acoustic foam panels.

Adhesive squares

Adhesive squares are as powerful as spray and create less of a mess. But it takes more time than the spray adhesive takes. At first, take a marker to spot the area at the wall, ceiling, or other desired surfaces you want to cover with an acoustic foam panel. 

The surfaces should be washed with isopropyl alcohol and wiped the cleaned surface with a wipe. This square has two paper livers on its front and back.

Pull out the paper liner off one side of the square and paste the disclosed side to the back of the acoustic foam panel. Paste the adhesive square to every corner on the back of the panel and through its outside edges. 

Use two adhesive squares for a 1-inch panel. Remove the other paper liver at the adhesive square. Grasp the acoustic foam panels and place them on the spot you have spotted for hanging. Firmly press on it for around 30 seconds. Cover all the desired surfaces. Adhesive spray or adhesive square can damage the walls or ceilings, especially if the room or the studio is a rental. 

Without damaging walls, the best option is 3M Command strips. These strips peel off using a single thick cardboard or plywood board with adhesive to install acoustic foam without damaging walls.

How to use acoustic foam panels

Acoustic foam panels are gadgets that are used to reduce echoes and reverberations. 

Acoustic foam panels are made with polyurethane or extruded melamine foam. These have two sides: either pyramid or cone or wedge or uneven cuboid shapes. These are used in recording rooms, studio rooms, dubbing rooms, theatres, churches, gymnasiums, restaurants, and many other places.

To prevent echoes, reverberations use acoustic foam panels. This is budget-friendly and worthy material. You can install these rapidly and efficiently. 

Firstly, choose the room or space you want to make a studio room or dubbing room. It should be pasted on the walls, ceilings, and doors of the chosen room. You can use adhesive spray or adhesive square or push pins to attach these to the desired surfaces. 

Acoustic foam panels make your room less echoey and less noisy. Though these are cost-effective and work genuinely, it is recommended by everyone.

Now enjoy considerably refined sound quality during your recording or listening sessions. 

Affiliate Disclosure: We use affiliate links in our content. When you click on the link and redirect to Amazon and buy something, we will earn some bucks, this would not cost you anything but it helps us to pay our writing team.

To contact our team, please drop an email to - thebuyersreviews@gmail.com, We will reach out to you in the next 48 business hours.

Related Posts

Share via
Copy link
Powered by Social Snap